top of page

CPAP Maintenance

Inspection and replenishment

For F20 users

 

  1. Check the F20 connector daily for signs of damage or blockages caused by dirt and dust.

  2. The connector should be replaced at least every six months or if there are signs of damage.

 

For N20 users

 

  1. Check the N20 connector daily for signs of damage or blockages caused by dirt and dust.

  2. The connector should be replaced at least every six months or if there are signs of damage.

 

AirMini tubing

 

  1. Check the AirMini tubing daily for any holes, tears or cracks.

  2. The tubing should be replaced at least every six months or if there are signs of damage.

 

AirMini air filter

 

  1. Check the AirMini air filter for any holes, tears, cracks, or blockages caused by dirt or dust.

  2. The air filter should be replaced at least every six months or if there are signs of damage. It cannot be washed.

  3. To change the air filter, slide the air filter cover off and replace the old air filter with a new one.

  4. Attach the air filter cover on again, and ensure it is fitted at all times to prevent water and dust from entering the machine.

 

HumidX and HumidX Plus

 

  1. Check your HumidX or HumidX Plus daily for signs of damage or blockages caused by dirt and dust. They cannot be washed.

  2. HumidX and HumidX Plus must be replaced within 30 days after opening the packaging or if there are signs of damage.

Humidification

  1. To insert the optional HumidX / HumidX Plus, for N20 or AirFit P10 for AirMini users, open the connector by gently twisting.

  2. Grip the HumidX / HumidX Plus at the edges, with blue / grey side facing down towards the tube, and place it inside.

  3. Close the connector by twisting its ends back together until they lock into place.

  4. HumidX and HumidX Plus must be discarded and replaced within 30 days after opening the HumidX / HumidX Plus packaging.

bottom of page